Quisk Version 4.1.15 March 2018

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

Quisk Version 4.1.15 March 2018

ahlstromjc
Administrator
I changed the logic for the PTT keyboard shortcut. If you are using a PTT shortcut key, go to the Config/Radio/Keys screen and check the keys you are using.  I made further changes to support Hermes-Lite. And the "darwin" platform was added to defaults. I fixed the Status screen flickering that occurred on Windows.

Jim
N2ADR
Reply | Threaded
Open this post in threaded view
|

Re: Quisk Version 4.1.15 March 2018

kc7noa
I found a bug some where introduced between 4.1.3 and 4.1.15 ...

it looks like something to do with the FM offset for repeaters ...

   Hardware.RepeaterOffset(offset)
  File "softrock/hardware_usb.py", line 121, in RepeaterOffset
    vfo = self.vfo + int(offset * 1000) # Convert kHz to Hz
TypeError: unsupported operand type(s) for +: 'NoneType' and 'int'
Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
    lambda event: event.callable(*event.args, **event.kw) )
  File "quisk.py", line 5179, in OnReadSound
    Hardware.RepeaterOffset(offset)
  File "softrock/hardware_usb.py", line 121, in RepeaterOffset
    vfo = self.vfo + int(offset * 1000) # Convert kHz to Hz
TypeError: unsupported operand type(s) for +: 'NoneType' and 'int'
Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
    lambda event: event.callable(*event.args, **event.kw) )
  File "quisk.py", line 5179, in OnReadSound
    Hardware.RepeaterOffset(offset)
  File "softrock/hardware_usb.py", line 121, in RepeaterOffset
    vfo = self.vfo + int(offset * 1000) # Convert kHz to Hz
TypeError: unsupported operand type(s) for +: 'NoneType' and 'int'
Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
    lambda event: event.callable(*event.args, **event.kw) )
  File "quisk.py", line 5179, in OnReadSound
    Hardware.RepeaterOffset(offset)
  File "softrock/hardware_usb.py", line 121, in RepeaterOffset
    vfo = self.vfo + int(offset * 1000) # Convert kHz to Hz
TypeError: unsupported operand type(s) for +: 'NoneType' and 'int'
Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
    lambda event: event.callable(*event.args, **event.kw) )
  File "quisk.py", line 5179, in OnReadSound
    Hardware.RepeaterOffset(offset)
  File "softrock/hardware_usb.py", line 121, in RepeaterOffset
    vfo = self.vfo + int(offset * 1000) # Convert kHz to Hz
TypeError: unsupported operand type(s) for +: 'NoneType' and 'int'
Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
    lambda event: event.callable(*event.args, **event.kw) )
  File "quisk.py", line 5179, in OnReadSound
    Hardware.RepeaterOffset(offset)
  File "softrock/hardware_usb.py", line 121, in RepeaterOffset
    vfo = self.vfo + int(offset * 1000) # Convert kHz to Hz
TypeError: unsupported operand type(s) for +: 'NoneType' and 'int'
Traceback (most recent call last):
  File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda>
Killed
kc7noaodroid@odroid:~/Downloads/quisk-4.1.15$
Reply | Threaded
Open this post in threaded view
|

Re: Quisk Version 4.1.15 March 2018

ahlstromjc
Administrator
This is caused by turning on "Use repeater offset" on the Config/Options screen, but then not entering the offset on the Favorites screen.  If there is no offset the code fails.  I can put in a fix so the offset is zero, but that is probably not what you want either.  Just enter the offset. and the tone.

Jim
N2ADR
Reply | Threaded
Open this post in threaded view
|

Re: Quisk Version 4.1.15 March 2018

kc7noa
This post was updated on .
I upgraded from 4.1.3 to 4.1.15 ... does the favorite list need to be redone ...

I have a repeater of 146.88Mhz with a negative offset and tone that worked with 4.1.3 -- no other changes

4.1.3 still working great
Reply | Threaded
Open this post in threaded view
|

Re: Quisk Version 4.1.15 March 2018

kc7noa
tried making a new entry and the same thing happens
Reply | Threaded
Open this post in threaded view
|

Re: Quisk Version 4.1.15 March 2018

ahlstromjc
Administrator
In reply to this post by kc7noa
The favorites list should not need to be redone.  But check the value for the repeater that shows the problem.

Jim
N2ADR
Reply | Threaded
Open this post in threaded view
|

Re: Quisk Version 4.1.15 March 2018

kc7noa


I dont see anything wrong
Reply | Threaded
Open this post in threaded view
|

Re: Quisk Version 4.1.15 March 2018

kc7noa
Seems to be working now ....

Dont know why, The only thing i remember that i did last before it started working was change bands ....

Anyway .. love the Space key keyup .... no more Vox drop out !!!!
Reply | Threaded
Open this post in threaded view
|

Re: Quisk Version 4.1.15 March 2018

pascal
This post was updated on .
Hi, it looks like the "PTT key" doesn't work as before. It works when the "key" window is openned, but it stops to work when we come back to the "graph" window.
 
Another issue is the dx cluster system that works when I use the config file, but SOMETIMES doesn't work with a named radio file. Same issue with the "band" setting windows that sometimes closes quisk with a named file.
Pascal, F6EHP,  visit  www.f6ehp.fr