audio issue on quisk

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

audio issue on quisk

pascal
Hello,
I try to install quisk on a xu4 SBC with ubuntu 16.04 and get an issue with the usb headphone located on hw:1

Quisk status says : cannot open playback device hw:1,0 ( device or ressource busy )
the quisk_conf.py file is :
...//...
sample_rate = 192000
name_of_sound_capt = "" # We do not capture from the soundcard

name_of_sound_play =  "hw:1,0" # Play radio sound here.  Linux.
microphone_name = "hw:1,0" # The microphone is here.
...//...

and
odroid@odroid-XU4:~$ arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: odroidaudio [odroid-audio], device 1: i2s0-pri dummy-aif2-1 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Headset [Logitech USB Headset], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

What can I try to solve that ?

Thanks for helping

73, Pascal  F6EHP

Pascal, F6EHP,  visit  www.f6ehp.fr
Reply | Threaded
Open this post in threaded view
|

Re: audio issue on quisk

pascal
Solved !  in 3 points :

- a usb headphone that was not a good friend of quisk ( probably a not compatible usb driver with quisk)
- i put the headset on hw:2 instead of hw:1 (on which I put the E-MU usb card for the I/Q capture)
- in the ubuntu sound control, the input and output must not be selected on the headphones !

Best 73, Pascal
Pascal, F6EHP,  visit  www.f6ehp.fr