using 2 hamlibs

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view

using 2 hamlibs

Ok .. this is an exploratory question about using hamlib with Quisk ..

I do use rig 2 and xml-rpc to get quisk to ptt my SDR using the ensemble code (PE0FKO)

Id like to also use hamlib cm108 gpio ... to trigger Tx of my UHFSDR/ensemble-isk

im not ready to test hamlib cm108 yet ...

The command iv seen used for testing OUTPUT of gpio ptt was
sudo rigctl -vvvvv -p /dev/hidraw2 -P CM108 -r /dev/ttyUSB0